Cisco CCNA Security: The A, B, C’s of IPv6
About This Course
This course is approximately 4 hours in length and will cover IPv6 protocol in detail. I will compare the differences between the IPv4 to IPv6, and the benefits that IPv6 brings to the future of networking.
DISCLAIMER: Please note that the simulators/emulators used in this course are not part of the course. It is the students responsibility to have these to practice with. The Cisco Packet Tracer and/or VIRAL (Virtual Internet Routing Lab) are Cisco proprietary software and can only be obtained through Cisco. It is up to each student to obtain the simulator/emulator of their choice to study along with this course.
Students will get a thorough understanding of IPv6 and how we would implement it in a real world environment.
We will discuss the format of an IPv6 address, and breakdown the different components, like the Network Prefix, Interface ID, what each 16 bit section does and specifically the subnetting section of IPv6. We will learn about the new types of addresses that comes with IPv6, its configurations using RIPng, EIGRP for IPv6, OSPFv3 using both static assigned addresses and the EUI-64 format. We will also learn about the transition methods such as ISATAP, 6to4, and NAT-PT.
This is a lecture based course using the Touch-IT Technology Smart board, which will make learning very interactive and engaging. Hands on labs will be used to drill down the concepts learned in each lecture using Cisco’s Packet Tracer.
My method will make you feel like you are sitting in a classroom environment and give the most needed hands on experience!
Handouts will be available to facilitate learning and practice.
This course will help the student become familiar with the use of IPv6, recognizing IPv6 addresses and how to implement them in your environment…but it will also help in preparing for any networking certification or Computer Science Degree; not to mention the fact that for those already in the field, it will further improve routing decisions in their particular networks.
What are the requirements?
- Students should have an understanding of the IPv4 Protocol and hexadecimal numbers.
What am I going to get from this course?
- Once you finish my course, you will have a strong grasp on the concepts of IPv6 and methods to use in different networking environments. You will be able to configure any of the routing protocols discussed using IPv6. You will learn how to dual stack your router using both IPv4 and IPv6 to help in the transition to a fully implemented IPv6 environment.
- The understanding of IPv6 is an essential element for any Networking and/or IT Professional. This course will prepare the student for any networking certification such as N+, CCNA, MCSE to include any Computer Science Degree.
What is the target audience?
- This course is intended for anyone that is preparing for a network certification or Computer Science Degree. However, it does go beyond that, it is also intended for those Networking and/or IT Professionals that are already in the field and need a better understanding of IPv6.
Course Staff
Lazaro Diaz
Network Engineer, Cisco & Microsoft Instructor
2016 will be the year to reach your goal!
If you are determined, ambitious and hungry for a new beginning…then 2016 should be your year.
…and how better to start the year than to get your CCNA!
Whether you are interested in the CCNA R/S, the CCNA Wireless or just want to understand the key topics of these certification exams, taking one or all of my courses, will get you a little closer to that goal.
But, don’t take my word for it…please take a look at the FREE previews (they are available in all my courses) and see for yourself.
As for me, 2016 will be the year of putting out new courses for different types of IT certifications among other things
What you wanted to know about me:
If you are tired of the same old methods of learning and want someone that is pretty much unconventional, but at the same time will provide you with an enjoyable learning experience in layman’s terms…then please preview my courses and you will discover that I am your guy.
I am a Network Engineer with over 14+ years in the field and in the teaching industry. I hold the following certifications: CCNA, CCNA Security, CCNA Voice, Security+, Network+, A+, MCP, MCTS & MOS and I just passed the first of two test for the CCIE! My teaching experience stems from teaching at institutions like Palm Beach Community College, New Horizons, Florida Career College (now Anthem College) and The Academy of South Florida, not to mention teaching at my own training facility in Miami, Florida.
Having been in all sides of the spectrum; as a student, a teacher/trainer, and in the field, I believe this uniquely qualifies me to understand the student, and what they have been exposed to as opposed to what they really want to accomplish. These two are sometimes extremely conflicting and frustrating. That is why I teach in the manner I do and can relate to the student’s rejection of the Status Quo.
I have taught corporate employees at MetroPCS (now T-Mobil) and have also taught IT professionals of companies like The Florida Marlins, Hospital personnel & Attorney’s firms amongst others to be able to acquire their CCNA certification and/or their Microsoft certifications; like the MOS (Microsoft Office Specialist). YES!…I am also an applications instructor and also teach Word, Excel, PowerPoint and Access.
I teach in an unconventional way that allows for students to understand the subject matter and can therefore, not only prepare them for a Cisco and/or Microsoft certification exam, but apply my methods in the real world. I strive to give the student a greater opportunity to compete in the current job markets. Do I go above and beyond what is needed for a certification?…YES, I do!…because it’s not only about getting a certification, it’s also about making sure the student is prepared for a job interview and/or maintaining their current job by enhancing their skills. This is where I step in and make sure that the student is prepared for whatever they need and make them an asset to their employer. Everyone has different requirements and I make sure, or at least I try, to provide information for most scenarios.
My classes and/or courses are very simple and that’s how I like to teach. If things are kept simple, easy and explained in a way that the student can grasp quickly and retain the information…then I have achieved my goal!
For those that do not know me yet, you may not be used to my style of teaching, but you will soon get accustomed to it :)… I’m very laid back, I try to make learning fun and I teach in layman’s terms…no physics jargon or mumbo jumbo in my teachings. My courses are very interactive and extremely dynamic!…you will not find my lectures monotone or boring, because falling asleep, for lack of excitement, is just NOT an option. Just take a look for yourself at my video previews, which I always provide on ALL my courses, so you can determine if I’m the right guy to help you get your industry specific certifications. 😉
I certainly hope that after a careful review of my credentials & testimonials (you can Google it you know!), I’m the Cisco & Microsoft Instructor you’re looking for!
Laz
Network Engineer,
Motivational Evangelist, Author,
Cisco & Microsoft Instructor
Frequently Asked Questions
What web browser should I use?
The EnlightMe platform works best with current versions of Chrome, Firefox or Safari, or with Internet Explorer version 9 and above.
Course Features
- Lectures 17
- Quizzes 0
- Duration 4 Hours/Week
- Skill level
- Language English
- Students 2
- Certificate No
- Assessments Self
-
Section 1: Review of IPv4
- Lecture 1.1 Lecture 1:Introduction to the ABC’s of IPv6 Locked
- Lecture 1.2 Lecture 2:How is the address formatted? Locked
- Lecture 1.3 Lecture 3:The Classes of Addresses Locked
- Lecture 1.4 Lecture 4:Subnetting in IPv4 Locked
-
Section 2: Understanding IPv6
- Lecture 2.1 Lecture 5:The need for IPv6 Locked
- Lecture 2.2 Lecture 6:The format of an IPv6 address Locked
- Lecture 2.3 Lecture 7:Types of Addresses Locked
- Lecture 2.4 Lecture 8:Special Addresses Locked
-
Section 3: IPv6 configuration
- Lecture 3.1 Lecture 9:Configuring a router with IPv6 addresses dynamically Locked
-
Section 4: IPv6 Routing Protocols
- Lecture 4.1 Lecture 10:Configuring a router with IPv6 addresses statically Locked
- Lecture 4.2 Lecture 11:Configuring RIPng on our Routers Locked
- Lecture 4.3 Lecture 12:Configuring EIGRP for IPv6 Locked
- Lecture 4.4 Lecture 13:Configuring OSPFv3 on our Routers Locked
-
Section 5: Transition Mechanism
- Lecture 5.1 Lecture 14:Transitioning to the IPv6 World Locked
-
Section 6: Subnetting in IPv6
- Lecture 6.1 Lecture 15:Do we need to subnet in IPv6? Locked
- Lecture 6.2 Lecture 16:How to subnet in IPv6 Locked
- Lecture 6.3 Lecture 17:Summarizing the ABC’s of IPv6 Locked
